跳转到主内容

跳到步骤#1

James Loy编辑

等待批准

已删除
已添加
不变

步骤行

[* violet] Use theLocate the black ZIF connector located directly below the lens.
[* black] Use the
Spudger to rotate the black ZIF connector tab up and pull the ribbon out that it was holding.
[* orange] Use the Spudger and pull each end of the brown ZIF connector tab directly out in the direction that the ribbon is going. You must unlatch both ends before the connector can pull out. Once both ends are unlatched, pull ribbon cable out.
[* violet] Use theLocate the black ZIF connector located directly below the lens.
[* black] Use the
Spudger to rotate the black ZIF connector tab up and pull the ribbon out that it was holding.
[* orange] Use the Spudger and pull each end of the brown ZIF connector tab directly out in the direction that the ribbon is going. You must unlatch both ends before the connector can pull out. Once both ends are unlatched, pull ribbon cable out.

图片1

旧版本

新版本

图片2

旧版本

新版本

图片3

没有之前的图片

已添加