菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

跳到步骤＃12

由 James Loy — 编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Lay the camera on its front side. Then use your fingers to gently shift the body of the camera while holding onto
[* black] Use finger to press down on camera's metal casing. Using other hand, lift the LCD screen so thatstraight up, making sure the LCD screen's ribbon for the LCD display can slide through the slot in thecable slides free of metal casing. Once ribbon is loose, lift LCD display out from the rest of the camera.
[* icon_caution] Be very careful with the Motherboard. Domotherboard. Do not break it in attempts to getapply a force on the LCD screen outmotherboard.
[* black] Lay the camera on its front side. Then use your fingers to gently shift the body of the camera while holding onto
[* black] Use finger to press down on camera's metal casing. Using other hand, lift the LCD screen so thatstraight up, making sure the LCD screen's ribbon for the LCD display can slide through the slot in thecable slides free of metal casing. Once ribbon is loose, lift LCD display out from the rest of the camera.
[* icon_caution] Be very careful with the Motherboard. Domotherboard. Do not break it in attempts to getapply a force on the LCD screen outmotherboard.
[* black] Camera, metal case, and tripod internal thread end can be separated now.