跳转到主内容

跳到步骤#11

James Loy编辑

等待批准

已删除
已添加
不变

步骤行

[* red] OnLocate the front side of the camera, there are two more ribbon cables that need to be released, one black ZIF connector and one blue ZIF connector. Both are located atconnectors on the bottom, belowfront of the lenscamera.
[* red] OnLocate the front side of the camera, there are two more ribbon cables that need to be released, one black ZIF connector and one blue ZIF connector. Both are located atconnectors on the bottom, belowfront of the lenscamera.
[* black] Use the flat end of the spudger to flip up the tab on the blue ZIF connector. Then pull the ribbon cable straight out.
[* black] Use the flat end of the spudger to flip up the tab on the black ZIF connector. Then pull the ribbon cable straight out.