菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

跳到步骤＃11

由 James Loy — 编辑

等待批准

已删除
已添加
不变

步骤行

[* red] On the front side of the camera, there are two more connectorsribbon cables that need to be removedreleased, one black ZIF connector and one blue ZIF connector, both located at the bottom below the lens.
[* black] Use the Spudgerflat end of the spudger to rotateflip up the tab on the blue ZIF connector. Then pull out the ribbon connector from the cameracable straight out.
[* black] Use the Spudgerflat end of the spudger to rotateflip up the tab on the black ZIF connector. Then pull out the ribbon connector from the cameracable straight out.
[* red] On the front side of the camera, there are two more connectorsribbon cables that need to be removedreleased, one black ZIF connector and one blue ZIF connector, both located at the bottom below the lens.
[* black] Use the Spudgerflat end of the spudger to rotateflip up the tab on the blue ZIF connector. Then pull out the ribbon connector from the cameracable straight out.
[* black] Use the Spudgerflat end of the spudger to rotateflip up the tab on the black ZIF connector. Then pull out the ribbon connector from the cameracable straight out.