跳到步骤#11
由 Jarrod Belsick — 编辑
- 之前
- 之后
- 不变
步骤行
[* red] On the front side there are two more connectors that need to be removed, one black one and one blue one, both located at the bottom below the lens. |
[* black] Use the Spudger to rotate up the black connector. Then |
[* black] Use the Spudger to rotate up the black connector. Then |
[* black] Use Spudger to unhook the ribbon from the blue connector, and pull ribbon out of connector. |