跳转到主内容

跳到步骤#4

Jarrod Belsick编辑

等待批准

已删除
已添加
不变

步骤行

[* red] Hold the camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
[* black] Use the flat end of the spudger to flip up the tab of the blue ZIF connector. Slide out the ribbon cable out.
[* blackicon_note] Once the ribbon is removedremoved, the LCD screen can be rotated away from its initial position to reveal more screws underneath.
[* icon_caution] Do not pull the LCD screen out or rotate past 180 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.
[* red] Hold the camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
[* black] Use the flat end of the spudger to flip up the tab of the blue ZIF connector. Slide out the ribbon cable out.
[* blackicon_note] Once the ribbon is removedremoved, the LCD screen can be rotated away from its initial position to reveal more screws underneath.
[* icon_caution] Do not pull the LCD screen out or rotate past 180 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.