跳转到主内容

跳到步骤#4

James Loy编辑

等待批准

已删除
已添加
不变

步骤行

[* icon_notered] Hold camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
[* black] Use the flat end of the spudger to liftflip up the toptab of the blue ZIF connector piececonnector. Slide out the ribbon (the blue ZIF connector remains attached to the motherboard)cable out.
[* icon_notered] Hold camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
[* black] Use the flat end of the spudger to liftflip up the toptab of the blue ZIF connector piececonnector. Slide out the ribbon (the blue ZIF connector remains attached to the motherboard)cable out.
[* black] Once the ribbon is removed the LCD screen can be rotated away from its initial position to reveal more screws underneath.
[* icon_caution] Do not pull LCD screen out or rotate past 180 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.