跳转到主内容

跳到步骤#3

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

-[* black] Use a spudger to detach the ribbon cable.
-[* icon_caution] Be careful when you use the spudger because you do not want to break the the ribbon.
-[* black] After releasing the screen cable, use the plastic opening tool to lift the button board.
-[* black] Once you hear a "click" sound that means you successfully opened the buttons board.
+[* black] Use a spudger to lift the LCD ribbon cable locking bar by angling it up, then withdraw the ribbon.
+[* icon_caution] Take care not to break it.
+[* black] Use the plastic opening tool at the bottom right hand side of the button board to lift it up and out.
+[* black] The buttons board comes out with a "click" as it snaps out of a connector below.