跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#6

Casey Matalone编辑

编辑已通过 由 Casey Matalone

之前
之后
不变

步骤行

[* black] Now moveWith the throw away paint brush begin to apply the resin to the frontback side of the hole and removedirectly on the cardboardcleaned surface.
[* black] Again size your material; however, this time you want you material to be roughlyAfter the size and shaperesin is on take one of your hole.
[* icon_note] Cut
the fiberglass pieces you cut out at least two or three layers ofearlier and place over the material inhole onto the beginning. You may needresin.
[* black] Continuing with the rush apply
more laterresin over onto the fiberglass until it is entirely soaked.
[* black] Now moveWith the throw away paint brush begin to apply the resin to the frontback side of the hole and removedirectly on the cardboardcleaned surface.
[* black] Again size your material; however, this time you want you material to be roughlyAfter the size and shaperesin is on take one of your hole.
[* icon_note] Cut
the fiberglass pieces you cut out at least two or three layers ofearlier and place over the material inhole onto the beginning. You may needresin.
[* black] Continuing with the rush apply
more laterresin over onto the fiberglass until it is entirely soaked.