[* black] Remove screws around the edge of the tablet. |
[* black] Four screws and one cable will remove the speaker assembly. |
[* black] Three screws and a pop on connector secure the micro-SD reader. |
[* black] There are several screws that hold the battery tray in place. The battery is held in with fairly strong adhesive, so I didn't try to take it out of the tray. |
[* black] Three cables are attached to the touch board. I didn't try to remove this board from the frame. |
[* icon_caution] Two screws hold the power connector in place. Remove these before trying to remove anything else. |
[* black] Disconnect the four cable connectors that lay across the battery. The cables with blue tabs do not have a locking mechanism holding the cable in place. |
[* black] There are two magnets located at the bottom center. More than likely used for a case cover or for a feature not included on this tablet.
|