跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

跳到步骤#2

Oh Tee编辑

编辑已通过 由 Oh Tee

已删除
已添加
不变

步骤行

[* black] Removeicon_caution] Two screws aroundhold the edge of the tabletpower connector in place. Remove these before trying to remove anything else.
[* black] Removeicon_caution] Two screws aroundhold the edge of the tabletpower connector in place. Remove these before trying to remove anything else.
[* black] Four screws and one cable will remove the speaker assembly.
[* black] Three screws and a pop on connector secure the micro-SD reader.
[* black] There are several screws that hold the battery tray in place. The battery is held in with fairly strong adhesive, so I didn't try to take it out of the tray.
[* black] Three cables are attached to the touch board. I didn't try to remove this board from the frame.
[* icon_caution] Two screws hold the power connector in place. Remove these before trying to remove anything else.
[* black] Disconnect the four cable connectors that lay across the battery. The cables with blue tabs do not have a locking mechanism holding the cable in place.
[* black] There are two magnets located at the bottom center. More than likely used for a case cover or for a feature not included on this tablet.

图片1

没有之前的图片

已添加