跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

跳到步骤#3

Courtney Crockett编辑

编辑已通过 由 Evan Noronha

已删除
已添加
不变

步骤行

[* blackblue] Insert the flat end of a spudgerscrewdriver in between the lower casecasing and lower front panel near the top right corner of the DSi.
[* blackgreen] Carefully run the spudgerflat screwdriver along the right edge of the DSiouter casing, creating an opening inbetween the body and the processcasing.
[* blackgreen] Continue running the spudger alongflat screwdriver around the backsidebody of the DSi until the majority of the lower case has been separated from the lower front panelseparated.
[* blackblue] Insert the flat end of a spudgerscrewdriver in between the lower casecasing and lower front panel near the top right corner of the DSi.
[* blackgreen] Carefully run the spudgerflat screwdriver along the right edge of the DSiouter casing, creating an opening inbetween the body and the processcasing.
[* blackgreen] Continue running the spudger alongflat screwdriver around the backsidebody of the DSi until the majority of the lower case has been separated from the lower front panelseparated.

图片1

旧版本

新版本

图片2

旧版本

新版本

图片3

旧版本

新版本