跳到步骤＃4
由 Elizabeth Kamine — 编辑
编辑已通过 由 Elizabeth Kamine
- 之前
- 之后
- 不变
步骤行
| - | [* red] Using a Phillips #000 Precision Screwdriver, remove the seven 4.0 mm screws that connect the metal plate to the motherboard. |
|---|---|
| + | [* icon_reminder] This step involves a lot of screws! To ensure you can reassemble your device properly at the end, keep track of the screws and their corresponding locations. |
| + | [* icon_note] Use a Phillips #000 Precision Screwdriver for all of the following steps. |
| + | [* red] Remove the seven 4.0 mm screws that connect the metal plate to the motherboard. |
| [* orange] Remove the three 4.0 mm screws that connect the metal hinges to the camera body. |