跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#2

Brett Hartt编辑

等待批准

之前
之后
不变

步骤行

[* black] Insert wisdom hereUsing the flat end of a spudger, pry the left speaker out of its socket on the front bezel.
[* black] De-route the speaker cable along the top edge of the screen.
[* icon_note] Work carefully and slowly, holding onto the wire and not the speaker itself. The solder joints may break if pulled on too hard.
[* black] In the same manner described above, remove the right speaker from its socket on the front bezel.
[* black] Place both speakers on the back of the upper LCD
.
[* black] Insert wisdom hereUsing the flat end of a spudger, pry the left speaker out of its socket on the front bezel.
[* black] De-route the speaker cable along the top edge of the screen.
[* icon_note] Work carefully and slowly, holding onto the wire and not the speaker itself. The solder joints may break if pulled on too hard.
[* black] In the same manner described above, remove the right speaker from its socket on the front bezel.
[* black] Place both speakers on the back of the upper LCD
.