跳到步骤＃5
由 Philip Le Riche — 编辑
编辑已通过 由 Philip Le Riche
- 之前
- 之后
- 不变
步骤行
| [title] Disconnection of zoom motor and sensors | |
| [* black] In a similar fashion to the focusing lens position sensor, gently scrape away the mastic from the two sensors on the front of the zoom motor, and lift the sensors out. | |
| + | [* black] On reassembly, secure the sensors as for the focusing lens position sensor. |
| [* black] Lift the two connectors off the back of the zoom motor. | |
| [* black] Release the ribbon from all the pegs and guides holding it to the lens body. It should now only be attached to the lens back plate. |