跳到步骤＃2
由 Philip Le Riche — 编辑
编辑已通过 由 Philip Le Riche
- 之前
- 之后
- 不变
步骤行
| [* black] The image sensor can be inspected or replaced without further disassembly of the lens. However, any dust or fingermarks may have a major impact on image quality and so it should preferably be left alone. | |
| [* black] With a small craft knife, scrape away the locking glue from the 3 screws securing the image sensor plate to the back of the lens. Take care to remove any loose fragments of glue which might fall into the lens. | |
| - | [* black] Remove the 3 screws. Renaining glue will make these stiff - take care not to burr the heads. Gently ease the image sensor away, keeping the lens face-down on the bench. Put the sensor aside, safe from dust contamination, such as in a self-sealing polythene bag. |
| + | [* black] Remove the 3 screws. Remaining glue will make these stiff - take care not to burr the heads. Gently ease the image sensor away, keeping the lens face-down on the bench. |
| + | [* black] Put the sensor aside, safe from dust contamination, such as in a self-sealing polythene bag. |