跳转到主内容

跳到步骤#2

Walter Galan编辑

等待批准

之前
之后
不变

步骤行

+[* black] With the panel sufficiently heated, fasten a heavy-duty suction cup near the upper right corner of the display glass.
+[* icon_caution] Don't fasten the suction cup on top of the rubber strip around the edge of the display glass.
+[* icon_note] To attach the [product|IF145-023|suction cups] we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.
+[* black] Slowly and gently pull the corner of the display glass up off the display assembly.
+[* icon_note] If only the top edge of the glass lifts up (as seen in the third picture), repeat steps one and two until you can lift up the corner of the panel.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加