跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#8

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

[* black] Remove the paper backing covering the self-adhesive pads on the two heat sinks included in the kit.
[* black] Lightly clean the surface of the two chips highlighted in red on the second picture.
[* icon_caution] Be sure to position the heat sinks correctly before you stick them down, as the adhesive is extremely strong and sensitive to being repositioned.
[* black] Stick the two heat sinks down against the top of the two chips highlighted in red on the second picture, being sure the fins are aligned as seen in the third picture.
[* icon_reminder] When reinstalling the optical drive, be sure both the power and SATA cables do not interfere with the heat sink attached closest to their sockets on the motherboard.

图片1

旧版本

新版本

图片2

旧版本

新版本

图片3

已删除