跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#6

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

[* black] After applying thermal paste to the processors, it is time to reattach the heat sinks one at a time. In our case, we attached the CPU heat sink first.
[* black] Insert four machine screws through the four holes around the CPU heat sink, with their heads on the back side of the board.
[* black] While holding the head of the screw, place a nylon washer '''then''' a metal washer over the threads.
[* icon_caution] The order of the washers is important. '''Do not''' put the metal washer on first.
[* red] Using the large flathead screwdriver bit, thoroughly tighten the screws into the CPU heat sink.
[* icon_note] On newer models, it is normal to have the screws slightly bend the lower fins on the CPU heat sink upward when they are fully tightened. This '''will not''' cause cooling issues and poses no risk to the motherboard.
[* icon_caution] When attaching the CPU heat sink, be sure the fins are aligned with the air flow from the fans (as seen in the third picture). Having the flat side of the fins perpendicular to the air flow will cause your Xbox 360 to overheat.
[* icon_reminder] Repeat the same process to attach your GPU heat sink.