跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#1

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

[* icon_note] '''The X-clamps are not reused when installing the red ring of death fix kit.'''
[* black] Now that the heat sinks are off both processors, use a plastic spudger to cleanremove all of the old thermal paste residue offfrom the faces of both processors and the inner faces of the heat sinks.
[* icon_caution] Work slowly as you remove the old residue, as many sensitive components are soldered near the face of the processors and if brokenprocessors. If damaged, you may need a whole new motherboard
[* black] Now that the heat sinks are off both processors, use a plastic spudger to cleanremove all of the old thermal paste residue offfrom the faces of both processors and the inner faces of the heat sinks.
[* icon_caution] Work slowly as you remove the old residue, as many sensitive components are soldered near the face of the processors and if brokenprocessors. If damaged, you may need a whole new motherboard
[* icon_note] It is best to use a solvent such as [product|IF179-023|ArctiClean] to dissolve the old thermal paste and remove all residue before applying new paste. Alternatively, you can use a mild solvent such as a high purity rubbing alcohol.
[* icon_note] You can also use many classic dry-deoxidating sprays: spray it on the paste then rub it; you will remove the paste almost effortlessly and with no residues.
[* icon_note] Now is also a good time to clean any dust out from between the fins of both heat sinks.