跳转到主内容

跳到步骤#9

Andrew Bookholt编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Insert a spudger between the back and front case of the display assembly, and peel the two ribbon cables off the two adhesive pads along the back case of the display assembly.
[* blackicon_note] The location of the pads on the back case is shown. The top left corner of the case is the corner of the phone shown in the first picture.
[* blackicon_note] The location of the pads on the back case is shown. The top left corner of the case is the corner of the phone shown in the first picture.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加