跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

跳到步骤#5

Cody编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Remove the halogen lamp and the screws securing the metal heat shield below the lamp.
[* black] It is unlikely, but the safety switch (red square) may be completely broken and not making contact. If you have a multimeter that can measure conduction, touch the metal contacts that the two wires are going to and press the switch in to see if it makes contact.
[* black] If the switch doesn't work, you can remove this from the unit and connect the two wires via a wire nut or solder (and some sort of wire insulator, like heat shrink).

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加