跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#9

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

[* icon_reminder] Important: when you reinstall a logic board, you'll need to replace the thermal paste that goes between the processor on the logic board and the heat sink. Failure to remove the old paste and apply a new layer can cause the computer to overheat and sustain damage. The following steps refer to replacing the thermal paste between the processor and heat sink; follow these steps only when you are ready to place the logic board in the computer.
[* black] Use a firm plastic edgeTo properly reassemble your PowerBook, you'll have to scrape the thermal materialclean off and replace the heat sink .
[* black] Apply a new layer of
old thermal pastecompound. Use our [guide|744|Applying Thermal Paste Guide] to prepare the processor and heat sink surfaces.
[* icon_reminder] Important: when you reinstall a logic board, you'll need to replace the thermal paste that goes between the processor on the logic board and the heat sink. Failure to remove the old paste and apply a new layer can cause the computer to overheat and sustain damage. The following steps refer to replacing the thermal paste between the processor and heat sink; follow these steps only when you are ready to place the logic board in the computer.
[* black] Use a firm plastic edgeTo properly reassemble your PowerBook, you'll have to scrape the thermal materialclean off and replace the heat sink .
[* black] Apply a new layer of
old thermal pastecompound. Use our [guide|744|Applying Thermal Paste Guide] to prepare the processor and heat sink surfaces.