跳转到主内容

跳到步骤#13

Jeff Suovanen编辑

编辑已通过 由 Jeff Suovanen

之前
之后
不变

步骤行

[* black] Grab the upper case with your right hand and rotate it slightly toward the top of the display so the upper display bracket clears the edge of the upper case.
[* black] Rotate the display slightly away from the upper case.
[* black] Lift the display up and away from the upper case, minding any brackets or cables that may get caught.
+[* icon_reminder] During reassembly, fit the display into place and install the display bracket Torx screws, then close the lid and lay the laptop upside-down to check the alignment of the screen to the body. If necessary, loosen the screws and realign the display before tightening.