跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#3

R Trent编辑

等待批准

之前
之后
不变

步骤行

[* black] Holding the drive top up, gently pull the top half up from the bottom half. The back will rotate up as the front is connected by two plastic clips.
[* red] These clips are most easily undone by rotating the top enclosure to about 30º then lifting it up firmly.
[* icon_note] Be careful to not let it jerk violently during separation. Once the top is removed, there isn't much of anything holding the latch assemblymechanism in place. It would be a bummer to lose the spring, though getting the latch assembly back in place if it comes out is not too difficult, just don't lose the spring.
[* icon_note] Be careful to not let it jerk violently during separation. Once the top is removed, there isn't much of anything holding the latch assemblymechanism in place. It would be a bummer to lose the spring, though getting the latch assembly back in place if it comes out is not too difficult, just don't lose the spring.