跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#3

R Trent编辑

等待批准

之前
之后
不变

步骤行

[* black] Holding the drive top up, gently pull the top half up from the bottom half. The back will rotate up as the front is connected by two plastic clips.
[* red] These clips are most easily undone by rotating the top enclosure to about 30º then lifting it up firmly.
[* icon_note] Be careful to not let it jerk violently during separation. Once the top is removed, there isn't much of anything holding the latch assembly in place. It would be a bummer to lose the spring, though getting the latch assembly back in place if it comes out is not too difficult, just don't lose the spring.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加