跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#1

R Trent编辑

等待批准

之前
之后
不变

步骤行

[* black] Here it is. The standard 20GB HDD for the Xbox 360.
[* blackred] Notice the proprietary adapter. Inside is just a pretty standard 2.5" SATA drive...
[* blackorange] I took these pictures as I was putting it back together, hence the Microsoft warranty sticker looking a little funny.
[* blackyellow] You may also notice the screw in the bottom left is partly out. This is because as I was replacing the screw before it, I broke my bit. I was using a 1/16" flathead bit (I don't have a T6 Torx) and used just a little too much torque. I found another 1/16" bit to finish, but didn't get a pic.
[* blackred] Notice the proprietary adapter. Inside is just a pretty standard 2.5" SATA drive...
[* blackorange] I took these pictures as I was putting it back together, hence the Microsoft warranty sticker looking a little funny.
[* blackyellow] You may also notice the screw in the bottom left is partly out. This is because as I was replacing the screw before it, I broke my bit. I was using a 1/16" flathead bit (I don't have a T6 Torx) and used just a little too much torque. I found another 1/16" bit to finish, but didn't get a pic.

图片2

旧版本

新版本

图片3

旧版本

新版本