跳到步骤＃1
由 David Lyke — 编辑
编辑被拒绝 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| [* icon_caution] Whenever working near the logic board, it is always wise to first disconnect the battery to avoid short circuits. | |
| - | [* black] If present, grab the plastic tab attached to the battery connector and pull it toward the front edge of the device. For |
| + | [* black] If present, grab the plastic tab attached to the battery connector and pull it toward the front edge of the device. For 2011 models the battery connector will not have a tab and is simply a plug that inserts straight down into the motherboard--to remove pry the plug straight up. |
| [* icon_note] If the plastic tab is missing, use a spudger to pry the connector up from its socket. | |
| [* icon_reminder] Pull the tab parallel to the face of the logic board. |