跳转到主内容

跳到步骤#2

Kelsea Weber编辑

编辑已通过 由 Kelsea Weber

之前
之后
不变

步骤行

-[* black] Once the headphone jack is detached it will dangle by the wires attached to the main circuit board. Do not worry about the connections, they are solid and will not break.
-[* black] Remove the two screws that hold the main circuit board to the casing. Use a Phillips #00 Screw Driver. This will allow access to the connection points of the headphone jack.
+[* icon_note] Once the headphone jack is detached it will dangle by the wires attached to the main circuit board. Do not worry about the connections, they are solid and will not break.
+[* red] Use a Phillips#00 screwdriver to remove the two screws that hold the main circuit board to the casing. This will allow access to the connection points of the headphone jack.

图片1

旧版本

新版本

图片2

旧版本

新版本