跳转到主内容

跳到步骤#1

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

-[title] Screws on Outer Back Casing
-[* black] Remove the six screws on the back of the device and set aside for later.
- [* icon_note] There are some Game Boy consoles that may have tri-wing screws instead of Phillips head screws securing the back of the console. In this case you would need to use a different screwdriver.
- [* icon_caution] Be careful when removing screws. You do NOT want to strip them!
+[* red] Remove the six Phillips or Tri-point screws from the back of the device.
+ [* icon_note] These screws may be Phillips or Tri-point. Be sure to check before you begin your repair!