跳转到主内容

跳到步骤#1

nunya编辑

编辑已通过 由 nunya

之前
之后
不变

步骤行

-[* red] Remove the 6 screws on the back of the Game Boy system with a #00 Phillips Screw Driver.
- [* icon_note] Some Game Boys may have tri-wing screws securing the back case, rather than Phillips.
-[* black] Place these screws in a safe place.
-[* icon_caution] Be careful with these screws as they are easy to strip, and if this happens, they are almost impossible to remove.
+[* black] Remove the six screws on the back of the device and set aside for later.
+[* icon_note] FYI - Some Game Boys may have tri-wing screws securing the back case, rather than Phillips. A special screwdriver may be required
+[* icon_caution] Warning - Be careful not to strip the screws.