跳转到主内容

跳到步骤#3

Brett Hartt编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Insert a spudger between the frontupper and rear panelslower cases along the left edge of the controller.
[* black] Rotate the spudger toward the front of the controller to prycontroller, prying the two panelscases apart.
[* black] Insert a spudger between the frontupper and rear panelslower cases along the left edge of the controller.
[* black] Rotate the spudger toward the front of the controller to prycontroller, prying the two panelscases apart.