跳转到主内容

跳到步骤#3

Erick编辑

编辑已通过 由 Erick

之前
之后
不变

步骤行

[title] Remove hidden screw
[* black] Remove the black sticker on the bottom left side (As shown in the picture).
-[* black] Remove the screw that was under the black sticker using the Torx Screwdriver 5mm.
+[* red] Remove the screw that was under the black sticker using the Torx Screwdriver 5mm.
[* black] Using the plastic opening tool separate the plastic cover from the screen. You will notice that there are pieces attached to both sides (So be careful). On the top left corner you will see the screens flex attached to the mother bothered, watch out when separating them.