跳转到主内容

跳到步骤#11

David Hodson编辑

等待批准

之前
之后
不变

步骤行

-[* black] Using the flat end of a spudger, flip up the retaining flap on the UNKNOWN cable ZIF connector.
-[* black] With the pointed end of the spudger, pull the UNKNOWN cable from it's connector on the underside of the logic board.
-[* icon_note] The logic board is now free of the upper case.
+[* black] Using the flat end of a spudger, flip up the retaining flap on the upper display data cable ZIF connector.
+[* black] With the pointed end of the spudger, pull the upper display data cable from its connector on the underside of the logic board.
+[* icon_note] The logic board is now free from the upper case.