跳转到主内容

跳到步骤#11

David Hodson编辑

等待批准

之前
之后
不变

步骤行

[* black] Using the flat end of a spudger, flip up the retaining flap on the UNKNOWN cable ZIF connector.
[* black] With the pointed end of the spudger, pull the UNKNOWN cable from it'sits connector on the underside of the logic board.
[* icon_note] The logic board is now free offrom the upper case.
[* black] With the pointed end of the spudger, pull the UNKNOWN cable from it'sits connector on the underside of the logic board.
[* icon_note] The logic board is now free offrom the upper case.