跳转到主内容

跳到步骤#3

Brett Hartt编辑

等待批准

之前
之后
不变

步骤行

[* black] Using the flat end of a spudger, flip up the retaining flap on the UNKNOWNtouchscreen cable ZIF connector.
[* black] With the pointed end of the spudger, pull the UNKNOWNtouchscreen cable from its connector on the logic board.
[* black] Using the flat end of a spudger, flip up the retaining flap on the UNKNOWNtouchscreen cable ZIF connector.
[* black] With the pointed end of the spudger, pull the UNKNOWNtouchscreen cable from its connector on the logic board.