跳到步骤#5
由 Caleb Kelsay — 编辑
编辑已通过 由 Caleb Kelsay
- 之前
- 之后
- 不变
步骤行
[* black] Use wide plastic pry tool to pry around the edge of the phone to detach the back aluminum plate from main assembly. |
[* icon_caution] Pry carefully around the card slots. |
[* black] Slowly pull up from the right side like opening a book and use 2.5 flat head from iFixit tool kit to peel foam adhesive around the camera away from the back plate. |
[* icon_caution] The plastic piece for the power button may fall out. Set it aside for reassembly. |