跳转到主内容

跳到步骤#4

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

[* black] There are 3 more clips underneath. Release these.
[* black] The side panel is still held by a clip underneath where the control panel was. Press it from under the printer with a flat screwdriver. Ease this section of the side panel forwards, making sure it bends at the front corner, not by the clip, where it is relatively weak.
[* black] (In the photo you can see the arrows I marked to remind me where to bend it and where not to.)
+[* black] On reassembly, locate this latter clip before offering up the others.