跳转到主内容

跳到步骤#4

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

+[* black] There are 3 more clips underneath. Release these.
+[* black] The side panel is still held by a clip underneath where the control panel was. Press it from under the printer with a flat screwdriver. Ease this section of the side panel forwards, making sure it bends at the front corner, not by the clip, where it is relatively weak.
+ [* black] (In the photo you can see the arrows I marked to remind me where to bend it and where not to.)

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加