跳转到主内容

跳到步骤#10

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

-[* black] Remove 2 screws on the left hand side, securing the print mechanism to the base through the main circuit board, and a further screw at the rear.
-[* black] Remove 3 more screws, one on the right of the paper tray and the other 2 on the left. One of the ones on the left releases a small piece of metal, which should be safely put aside.
+[* black] Remove 2 screws on the left hand side, securing the print mechanism to the base through the main circuit board.
+[* black] Remove a further screw, visible from the rear of the printer, also passing through the circuit board at a rear corner.