跳转到主内容

跳到这一步

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

+[* black] The cover open linkage remains attached to the top cover. You can now gain full access to it if it's still causing trouble.
+[* black] The root cause of the problem seems to be that the vertical section of the linkage has too much freedom to rotate about an axis parallel to its length. You could try reducing its freedom by gluing a piece of plastic to the side member underneath the vertical piece in order to reduce the clearance.