跳转到主内容

跳到步骤#8

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

-[* black] Remove 2 screws visible from the front of the printer, securing the print mechanism to the base, on the right of the paper tray. One is at the bottom of a deep hole.assembly.
+[* black] Remove 2 screws visible from the front of the printer, securing the print mechanism to the base, on the right of the paper tray. One is at the bottom of a deep hole.
[* black] Remove 2 screws more to the left of the paper tray, either side of the card reader assembly. On the right of the card reader assembly there are in fact 2 screws, and for the moment you should only remove the rear-most one.
-[* black] Remove 2 screws from the top read of the printer, which were exposed when you removed the top rear cover.
+[* black] Remove 2 screws from the top of the printer, which were exposed when you removed the top rear cover.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加