跳转到主内容

跳到步骤#7

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

[* black] Release the rear top cover. This is secured by 5 clips, the middle 3 of which can be released by inserting a flat screwdriver in the holes underneath them. The other 2 can be popped out quite easily.
+ [* black] (On reassembly, locate the clips on the top of the printer, then insert the 5 on the back.)

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加