跳转到主内容

跳到步骤#3

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

+[* black] Prise off the left hand side panel. There are 2 clips at the top, one at the back and three underneath.
+[* black] The side panel is still held by a clip underneath where the control panel was. Press it from under the printer with a flat screwdriver. Ease this section of the side panel forwards, making sure it bends at the front corner, not by the clip, where it is relatively weak.