跳转到主内容

跳到步骤#2

David Hodson编辑

等待批准

之前
之后
不变

步骤行

-[* red] Peel off the black tape covering the side button and keypad connectors on the logic board.
+[* red] Peel off the black tape covering the side button and display ribbon connectors on the logic board.
[* orange] Use the flat end of a spudger to disconnect the power button/volume button connector by lifting it off its socket on the logic board.
-[* yellow] Use the method described above to remove the keypad connector.
+[* yellow] Use the method described above to remove the display ribbon connector.