跳转到主内容

跳到步骤#2

David Hodson编辑

等待批准

之前
之后
不变

步骤行

-[* black] Peel off the black tape covering the side button and screen connectors on the logic board.
-[* black] Disconnect both connectors by prying straight up from their sockets on the logic board.
+[* red] Peel off the black tape covering the side button and keypad connectors on the logic board.
+[* orange] Use the flat end of a spudger to disconnect the power button/volume button connector by lifting it off its socket on the logic board.
+[* yellow] Use the method described above to remove the keypad connector.

图片1

旧版本

新版本

图片2

旧版本

新版本

图片3

旧版本

新版本