跳转到主内容

跳到步骤#1

David Hodson编辑

等待批准

之前
之后
不变

步骤行

-[* black] Disconnect the speaker cable from its socket on the speaker board prying straight up from the board with a spudger.
-[* black] Disconnect the speaker cable from its socket on the logic board as done above.
-[* red] Remove the speaker cable by pulling it horizontally out of the clips holding it in.
+[* black] Use a spudger to pry the speaker cable connectors off of the logic board and the speaker board.
+[* red] Remove the speaker cable by pulling it out of the metal clips along the side of the front case.