跳转到主内容

跳到步骤#8

Brett Hartt编辑

等待批准

之前
之后
不变

步骤行

-[* red] Release the plastic tab holding the rear case to the logic board screw.
-[* black] Lift the rear case off the device.
+[* black] With the spudger still between the rear case and front case, slide the spudger along the right edge of the device, moving toward the bottom, prying as you go.
+[* black] Continue prying along the bottom edge of the device from right to left, freeing it from the front panel.

图片1

旧版本

新版本

图片2

旧版本

新版本