跳转到主内容

跳到步骤#12

David Hodson编辑

等待批准

之前
之后
不变

步骤行

-[* red] Remove the front panel ribbon cable from the ZIF connector on the board that is attached to the display ribbon.
+[* red] Use the flat end of a spudger or your fingernail to flip up the retaining flap on the front panel ribbon cable ZIF socket.
+[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
+[* black] Disconnect the front panel ribbon cable.