跳转到主内容

跳到步骤#8

David Hodson编辑

等待批准

之前
之后
不变

步骤行

-[* black] Insert a spudger between the back and front case of the display assembly, and peel the two ribbon cables off the two adhesive pads along the back case of the display assembly.
+[* orange] Insert a spudger between the back and front case of the display assembly, and peel the two ribbon cables off the two adhesive pads along the back case of the display assembly.
[* red] The location of the pads on the back case is shown. The top left corner of the case is the corner of the phone shown in the first picture.